Sport Seal Fast-Drying Water-Based Floor Seal - 2 x 2½ Gallon Plastic Container

• Type – Acrylic Emulsion
• Form – Opaque Liquid
• Odor – Bland
• Color – Milky White
• Weight per Gallon – 8.73 Lbs.
• pH – 7.3 – 8.3
• Floor Solids – 20%
• Coverage – Up To 600 Sq. Ft. Per Gallon
• Slip-Resistance – N/A
• V.O.C. Content** – < 350 gm/l

WOOD PREPARATION:

• Sand floor using appropriate NWFA/MFMA procedures. All old finish or wax should be removed.
• Finish sanding with a new 120-grit screen. Do not use steel wool.
• Vacuum all dust and tack with clean, water dampened towels or microfiber pads that have been tightly wrung out. Tack until all dust has been removed.
• Allow floor to dry until there is no sign of moisture.

SEAL APPLICATION:
(use on any new or newly sanded floors)

• Check moisture content of wood. It should be 10% or less before sealing.
• Apply seal with a weighted T-bar.
• Allow first coat to dry 1 hour (longer dry times will be necessary under high humidity). Recheck floor with moisture meter. If moisture reading is higher than starting point, allow more dry time.
• Buff floor smooth with a green or maroon pad. DO NOT BUFF WITH SAND SCREENS.
• Tack until all dust has been removed with clean, water-dampened towels or microfiber pads that are tightly wrung out.
• Apply second coat of seal using a weighted T-bar. Allow 12 or more hours of cure time.
• Repeat steps 4 – 5 from above.
• If desired, paint game lines using a high quality, 100% acrylic latex paint. If not painting, proceed to step 10 below.
• Allow game lines 24 hours of cure time. Then buff the lines with a green or maroon pad and tack the entire floor as directed in step 5 above.
• Apply 3 coats of Sport Kote®(222SF) Water-Based Urethane Wood Finish or #228 Satin Sport Kote. See product label for complete details.

Note: If any grain raising is noticed between coats of Sport Kote, buff the floor smooth with a green or maroon pad and tack.

See label directions and SDS for complete usage and safety instructions.